Panorama · Plattekloof · Welgelegen · Burgundy Estate

5 min read · Technical note

Load shedding and refrigeration: protecting stock and equipment

Every interruption to power is also an interruption to temperature control. How much damage it does depends on the equipment, what is inside it and how quickly supply returns. The sensible response is planned in advance rather than improvised at 2am.

What happens inside a fridge or cold room

A closed, well-loaded cabinet holds temperature far longer than an empty one, because the stored product is itself the thermal mass. A domestic fridge kept closed will usually ride out a short interruption. A cold room with heavy door traffic during the outage will not, and a freezer that partly thaws and refreezes loses quality even when nothing is obviously spoiled.

Keep the door shut

The single most effective action during an outage is to leave the door closed. Every opening replaces cold air with warm room air, and that air has to be removed again when the plant restarts. If stock has to be moved, move it once and quickly, and move it into another working cabinet rather than onto a bench.

Backup power, sized honestly

An inverter sized for lights and a router will not start a compressor. Refrigeration has a high starting current, and any backup meant to carry cooling equipment has to be specified for that load and for the run time you need. Decide which circuits matter most: a freezer room, a display cabinet, or a single fridge for high-value stock.

What to check when the power returns

Confirm the equipment restarted, check the controller settings and any alarm, look for ice on the evaporator and water on the floor, and give the system time to pull down before opening doors. A unit that does not restart is often a control or protection fault rather than a failed compressor.

Design for interruption

Good insulation, tight doors, thermal mass on the shelves and a controller with a restart delay make a system resilient. If outages are frequent, that resilience is worth more than a marginally larger unit, and it costs less than replacing stock.

Quick answers

Two questions that come up

Short answers to the parts people ask about most.

How long will a fridge stay cold without power?

It depends on the cabinet, how full it is and whether the door stays closed. A full, closed fridge holds temperature considerably longer than an empty one being checked every hour.

Can a cold room run on an inverter?

Only if the inverter and battery bank are sized for the compressor's starting current and for the hours you need. That is a different specification from a lights-and-router backup.

Enquiry

Ask about your property

If the situation on your property is specific, a guide can only take you so far. Send the details and we will look at it properly.

  • Fridges, cold rooms, freezer rooms and commercial refrigeration
  • Split and ducted air conditioning, and heat pumps
  • Planned maintenance across several systems

Enquiries from this site are tagged for the northern suburbs and sent to info@reyds.co.za. Your details are used to reply to this enquiry only.